Lead Acid Smart Charger (1.0 A) for 12V Lead Acid Battery (worldwide use) --- CE listed

• The Smart charger (CE listed) is designed for small - mid size 12V Lead acid battery with three stage charging control to promise battery charged fully without damage
  

• Alligator Clips is installed in output terminal with 3.6' long 20AWG wire   ( red clip is positive)

Specifications: 

•  Input
  •  AC input voltage          100V-240V  at 50~~60 Hz  0.3A Max
  • Inrush current               10A at 120VAC,Cold start 
  • Input Current Mac         0.3A
  • Efficiency                    72%(min)at rating power,115Vac 50Hz
  • Plug:                          Direct plug in to wall plug without power cord
• Output   
  • Rated  12V DC @ 1.0Amp
  • 3.6' long 20AWG wire with one set of clips
• STATE: ( Three stage charging controlled by built in IC)

•  Charging:
  •  The Battery range is between 12V 0.8AH and 10AH
  • Short Circuit Protection
  • Reverse current: less than 5mA at 12VDC
•  Safety and EMI
  •  Safely Agency Approvals                       
  •  Emissions Requirements          FCC Class B
• General Features
  • Hold up time                         20mS (at 120VAC,output 30W )
  • Over voltage protection           115%-130%
  • Short circuit protection                        
  •  Hi-Pot Test                           Input to Output 1.75KVDC, 3mA, 1 Min
• Mechanical Requirements
  •  Dimensions (L*W*H)              81mm(3.2") x 54mm(2.1") x 43mm(1.7")
  • Weight                                 3.4 Oz  ( 100 grams)
  • Input plug                             USA AC plug
• Environmental Requirements
• Operating Temperature                  0 ^oC to  +40 ^oC
•  Storage Temperature                    -40 ^oC to  +70 ^oC
• Humidity                                      5~~95% RH